HOME   ABOUTUS   PRODUCTS   CUSTOMER SERVICES  CONTACTUS     中文版 
Products Category
 
 
 
 
 
   
ContactUs
 
Shenzhen Huatelong
Electronic Co.,Ltd.
(China)
 
Address:
Rm 508,Huijiang Building
Minzhi Avenue, Bao'an
District,Shenzhen City,
Guangdong Province.
China, Shenzhen, Guangdong,
China
Consult

 
  MSN交谈

 

 

 

 

 

 

 

 

 

products>>>>Solar Charger>>>>TYN-95
     
Use Method:
1, First use adapter attached charge full this product, External Charging Interface "4" and external rechargeable light "5" will be synchronized instructions for the charge state. Orange is charging, green is full charging.
2, The product can also use Sun light store engry.When charging use sun light,
then charging indicator light "5" will synchronization instructions, for the charge state. Orange is charging, green is full charging.
3,The product have more voltage output function, pls confirm the voltage of the item which will be charged before charging, then open the voltage switching button “6”,choose a suitable volatage charging.
4, Choose the cable attached, connect the cable plug into charger outjack “2”,
the output charge indicator "1" will synchronous flashing instructions. The output charge indicator "1" will stop automatically when the item be charged fully or the solar charger energy is low.
5, When the energy which stored in the solar charger is out , the lithium batteries with automatic circuit protection function, then it is necessary to reset button by clicking the "7" RESET. So it will be more effective use sun light store energy.
6, The products with a flashlight features such as "3", press and hold the flashlight light button "8", it can use a torch function.
7, The product is equipped with several adapter connector, which can be expanded different types of products.
8, Don’t direct the flash light to the eye , in order to damage the eye
Basic parameters
1, 1.2±0.1W solar cells, 5V/200mA±10% input parameters.
2, the built-in battery capacity : 1000MAH.
3, External input voltage : 5V/500mA.
4, The output voltages can be option,from point:5.0V;5.5V;7.5V; 9.0V/500mA±10%.
5, It will need 90mis while full charger common mobile phone.
6, It will need 2-3hours use city electricity charge full, can use AC110V-260V.
7, In the glare of the sun 30 points After,can for the corresponding equipment recharged
8, And the solar charger can charge full two mobile phone when it’s full power.
9, Dimensions 116 x 60 x 16mm.
10, Net weight : 112g.
Packaging specifications :
1,carton size: 450×250×300mm, 20PCS/ctn
2,gift box packing
3, configuration : one adapter, six mobile phones connectors, one switch cable.
粤ICP备07041587号
Tel21924108(20) Web E-mail htl@szhuatelong.com/E-mail:huatelong@126.com
Rm 508,Huijiang Building Minzhi Avenue, Bao'an District,Shenzhen City,Guangdong Province.China, Shenzhen, Guangdong, China
Factory Add:Longhua Shenzhen China.