A.Description：
1. USB interface (5.5V DC output interface)
2. Control switch: LED /OFF/ON
The button should always be kept “off” except using for light or charging other equipments. Otherwise, the charger will be charged by itself automatically when the strength of sunshine is enough. Push the switch button to “ON” to charge other equipments.
3. Bright LED flashlight (For Lighting).
4. When the No.1 LED indicator light is always on, this indicates that it is charging the internal battery of the solar charger.
5. When the No.3 green LED indicator light is always on, this means the internal battery is fully charged.
6. When the No.2 red LED indicator light is on, this indicates the switch button is pushed to “on” and the solar charger is charging other equipments.
7.DC IN charging interface （DC 5V，inner is positive
while outer negative）
B. Related parameter & specs:
Solar panel: Peak power supplied by photocell: 0.70W
Operating voltage: 5.5V (max)
Charging current: 130mA (max)
Battery capacity: 1500mAh（MAX）
Output voltage: 5.5V
Output current: 600mA (max)
Charging time: 12-14hrs (Irradiance: 100mW/ CM2)
3-4hrs (wall outlet 5v/800mA)
Dimensions：119×64×16mm
Case: Fire proof plastic (ABS)
Input interface: DC interface
Output interface: USB interface
Big Bright LED Flashlight: brightness 14000MCD
Control switch: ON /OFF/ LED
C. Function:
The universal solar mobile charger can supply power for mobile telephone, mp3, mp4, PDA, PSP, DV, and some family minitype energy conservation equipment.
D. How to use:
1. Using the solar energy to charge the Solar Charger:
First, Open the solar panel cover and put it under the strongest sunlight that you can find. Push the “Switch” button to “OFF” and the charger is now absorbing the sunlight and transforming it into electricity. The electricity will be stored in the internal lithium battery of the solar charger. When charging, the LED indicator light No.1 turns red. When the indicate light No.3 turns green, it means the battery is fully charged.
2. Using the DC adaptor to charge the solar charger:
When you are using the DC adaptor to charge the solar charger, push the “switch” button to “OFF” and plug the adaptor into the DC joint. Then connect the other end of the adapter to the power of 110V or 220V AC. When charging, the indicator light No.1 turns red. When the indicator light No.3 turns green, it means the battery is fully charged, please disconnect the connection of the adaptor.
3. Using the solar charger to charge mobile communication and digital products:
Select the right connector which is suitable for the electronic equipments that you are going to charge. Then connect the electronic equipment, adaptor and the solar charger with the USB cable. Next, push the “switch” button to “on”. The LED indicator light No.2 turns red. When your equipment is fully charged, please push the “switch” to “off” and disconnect the connection.
4. Using sun light or the DC adaptor to charge the internal battery of the solar charger and at the same time charging digital and mobile communication products:
If you use sun light or DC adaptor to charge solar mobile charger and at the same time charging digital and mobile communication products, you have to push the “switch” button to “ON”, and the indicator light No.2 turns red.
Note: 1. In order to activate the Built-in lithium battery, please charge the electronic product for more than 12 hours by DC adaptor for the first three times.
2. When the switch button is pushed to “ON”, the LED indicator light does not turn on. This is to remind the user that the voltage is too low, please use the sunlight or DC adaptor to charge the solar charger.
E.Accessories of the Product
One piece Universal Solar mobile power
Accessories:
One piece 100-240V AC/DC adapter
Six piece connectors for four brand cell phones
One piece USB cable
One User Manual
F.NOTE
a） Before using this product, please fully charge the internal storage battery of the solar charger. In order to activate the internal battery of the solar charger, for the first three times please use AC to charge the solar charger for at least 12 hours.
b) Don’t charge the equipment beyond the voltage range, otherwise it may cause damage to the charger or connected equipments.
c) Don’t keep it in a hot (over 80 degree centigrade), humid and caustic environment. Keep it away from fire.
d) Please wipe the wet surface with towel, and don’t dry it on fire.
e) Keep it away from water and smear, and don’t fiddle with the button and input/output interface with sharp tools.
f) Don’t litter the product into fire to avoid g explosion.
g) Disassemble this product privately is strictly forbidden.
h) If the indicator light doesn’t work when the switch is pushed to “LED” or “ON”, it is probably caused by the lower voltage of the internal storage battery of the solar charger. That is because the electronic circuit of the solar charger has a protection procedure which will stop the solar charger working for the sake of protecting the solar charger itself.At this moment,you have to charge the internal battery of solar charger with A/C or sunlight before using it.
G.Warranty terms:
One year’s free maintenance service from the day you purchased our product.
Free maintenance conditions and our responsibilities are as follows.
1. The warranty only applies to the quality problem of the product itself. If it is found that the breakdown belongs to quality problem, our customer service center will provide free maintenance service to you.
2. We provide a one year warranty on the universal solar charger. The charger interface and USB cable would be guaranteed for 3 months starting for the date of purchasing.
4. Receipt and maintenance document are needed to verify the counting date of the warranty. We will count the warranty period from the finishing date of the product if a receipt is not shown.
5. If the product’s label, finishing date or serial no. has been teared off or the user improperly uses the product without following the manual or it has been given to an unauthorized third party to repair, the warranty will be invalid consequently.
6. Our warranty responsibility is only limited in maintenance and replacement. The specific solution is decided by our company.
7. Our company will not be responsible for any direct or indirect consequence caused by improper use of the product.
8. Unless it is otherwise stated in the user’s manual, the users are not allowed to do any maintenance or debugging or repair no matter whether or not the product is in warranty period. The product has to be delivered to the suppliers, factories or designated maintenance centers for maintenance or debugging.
9. We are not responsible for any damage or loss in delivery and any unauthorized third-party’s maintenance would be seen as a breach of the warranty.